• Servonaut Configuration Tool, Lipo Checker, Servo & ESC Tester, Receiver Tester.
• Lipo Check: for 2s, 3s, 4s LiPo, LiIo, LiFe with diagnose and maintenance tips.
• Servo Tester: test the function of a servo or ESC without full radio setup.
• Receiver Tester: measures the received pulse in microsecounds and precent. Multibus protokolls are detected and displayed.
• Setup tool for modules with CARD interface, with menu in english just like in the Servonaut radio.
• Internal 2A BEC allows servo test powered by a 2s or 3s lipo.
• Dimensions (mm): 105 x 49 x 24

• Scale 1:14,5
• Facelift 2021
• Frame: steel, powder coated
• Tipper body: steel and aluminum
• Tires: 132 mm
• With two planetary gear motors in the rear (included)
• Curb weight: 10 kilograms
• Load up to 20 kilograms
• with spindle drive, comes pre-assembled and wired with motor (included)
• Dimensions:
  Length: 645mm, Width: 296mm, Height: 300/222mm
• kit comes unpainted with spindle drive, three motors and steering servo, electronics not included
• recommended electronics: speed controller Servonaut S22, sound module SM3, electrical light set ML4, MFR/MFX, loudspeaker Laut16, 12V NiMH or 3s-Lipo battery
  
• Please note: pictures show an example, kit comes unpainted without accessories!

1:14 Trailer Splash guard 907235/907629

1:14 Trailer Air-Tank (2)

For retrofitting the existing trailer axles with dummy air springs (500907069). The set contains all the necessary plastic parts and two air bellows. One set is required for each trailer axle; the metal parts and the assembly material are reused from the existing axle.

The new generation of CARSON trailer axles with dummy air springs and lift kit.
Bumps are cushioned even better by the new, softer rubber bellows and offer a driving experience that is absolutely true to the original. The two suspensions included (standard & with raised height + 8 mm) offer you the option of adapting your trailer to your higher (+ 8 mm) tractor from the saddle level.

Included: kit and instructions.

1:14 Curtain-side Trailer RTR white/blue

1:14 3-Axle Stanchion Trailer, new susp

1:14 2-Axle Material Trailer

The Liquid Container for your Tamiya Motor Truck!
The container kit with decorative sheet and instructions from Carson complements your Tamiya truck with semi-trailer. While the frame of the container is made of black anodized aluminium, the container itself is made of stainless steel. The locking on the chassis is done via twist locks. It is suitable for the Carson 2-axis container trailers 500907334 and 500907348. A semi-trailer is not included, the liquid container is not fillable.

1:14 7,2/12V Beacon Light bar Set FH16

1:14 7,2/12V Volvo FH16 Tow Taillig. PCB

1:14 Position-Light Unit FH16 Tow-Truck